Strength - X-Tend - Legs

Glute Machine

Glute Machine
Glute Machine

Model : JXL-504

This machine provides superior isolation of the glutes through the hip joint motion by eliminating any movement of the knee. A curvilinear path focuses on the glutes with contribution from hamstrings & quadriceps. The Being Strong Glute machine provides a maximum weight of up to 165 lbs.

  • Length : 44 inches/112cms
  • Width : 36 inches/91cms
  • Height : 55 inches/140cms
  • Strong Built

    Strong Built

  • Strong Built

    Top Quality

  • Be the first to review this product

How do you rate this product? *

  • How You Can Use It with Safety
Being Strong
Based on 6 comments -
Write a comment

Upholstery Colors

Frame Colors

Add to Wishlist Add to Cart Buy Now

Comparison - Chest

Reform
Pec Fly / Rear Delt (JRC - 1010)
Dimension
Length : 60 inches/152cms
Width : 68 inches/173cms
Height : 82 inches/208cms
Frame
50mm x 50mm & 50mm x 100mm
10/12 Gauge
Square & Rectangular Tubes
All the loading joints connected parts have been given an extra 5mm plate for fail proof safety.
Weight Stack
165 Lbs. 1" thick Bright Mild Steel Plates with 2 free-floating Nylon Bushings
Shroud
High Grade 1.5mm CRC Sheets laser cut in half-length, covers rear side of the weight stack for safety.
Pulley
3", 4" & 5" Diameter, "V" grooved fiber glass reinforced nylon pulley wheels with sealed friction free precision ball bearings mounted in safety housings.
Cables
Industrial strength 3/16" to 1/4" nylon coated cables with 4200 lbs. load capacity.
Laser Cutting
Computer operated laser cutting, marking and drilling, Punching, degree cutting, notching with all in one 3D laser cutting machine.
Guide Rod
3/4" thick solid Induction Hardened Rods of 50 to 60 HRC are secured with nylon bushings to allow free-foating movements of weight plates on guide rods.
Robotic Welding
Fully automatic robotic welding that improves weld accuracy for rugged fail-proof strength.
Powder-Coat Finish
Fully computer operated conveyorbased 14 tank process with zinc coating inside/outside and finished with an electro-statically applied textured powder coating, having an average thickness of 80 to 100 microns. The Antimicrobial Technology that is active in the coating destroys up to 99% of bacteria and mold on a protected surface.
Upholstery
Ergonomically designed superior grade upholstery with 2" thick high density molded PU foam designed independently as per the functionality of the machine and available in a large range of colours.
Seat Adjustment
Spring loaded pop pin knob for seat adjustment.


Warranty
All frames carry 10 years warranty from the date of installation.
Certification
Club Line
Pec Fly / Rear Delt (JC - 101)
Dimension
Length : 60 inches/152cms
Width : 68 inches/173cms
Height : 82 inches/208cms
Frame
50mm x 50mm & 50mm x 100mm
10 Gauge
Rectangular Tubes
All the loading joints connected parts have been given an extra 5mm plate for fail proof safety.
Weight Stack
220 Lbs. 1" thick Bright Mild Steel Plates with 2 free-floating Nylon Bushings
Shroud
High Grade 1.5mm CRC Sheets laser cut in half-length, covers rear side of the weight stack for safety.
Pulley
3", 4" & 5" Diameter, "V" grooved fiber glass reinforced nylon pulley wheels with sealed friction free precision ball bearings mounted in safety housings.
Cables
Industrial strength 3/16" to 1/4" nylon coated cables with 4200 lbs. load capacity.
Laser Cutting
Computer operated laser cutting, marking and drilling, Punching, degree cutting, notching with all in one 3D laser cutting machine.
Guide Rod
3/4" thick solid Induction Hardened Rods of 50 to 60 HRC are secured with nylon bushings to allow free-foating movements of weight plates on guide rods.
Robotic Welding
Fully automatic robotic welding that improves weld accuracy for rugged fail-proof strength.
Powder-Coat Finish
Fully computer operated conveyorbased 14 tank process with zinc coating inside/outside and finished with an electro-statically applied textured powder coating, having an average thickness of 80 to 100 microns. The Antimicrobial Technology that is active in the coating destroys up to 99% of bacteria and mold on a protected surface.
Upholstery
Ergonomically designed superior grade upholstery with 2" thick high density molded PU foam designed independently as per the functionality of the machine and available in a large range of colours.
Seat Adjustment
Polypropylene Rack - In - Pinion mechanism for high strength to weight ratio and excellent abrasion resistant movement.
Warranty
All frames carry 10 years warranty from the date of installation.
Certification
Club Line Plus
Pec Fly / Rear Delt (JPC - 101)
Dimension
Length : 60 inches/152cms
Width : 68 inches/173cms
Height : 82 inches/208cms
Frame
50mm x 50mm & 50mm x 100mm
10 Gauge
Rectangular Tubes
All the loading joints connected parts have been given an extra 5mm plate for fail proof safety.
Weight Stack
220 Lbs. 1" thick Bright Mild Steel Plates with 2 free-floating Nylon Bushings
Shroud
High Grade 1.5mm CRC Sheets laser cut in half-length, covers rear side of the weight stack for safety.
Pulley
3", 4" & 5" Diameter, "V" grooved fiber glass reinforced nylon pulley wheels with sealed friction free precision ball bearings mounted in safety housings.
Cables
Industrial strength 3/16" to 1/4" nylon coated cables with 4200 lbs. load capacity.
Laser Cutting
Computer operated laser cutting, marking and drilling, Punching, degree cutting, notching with all in one 3D laser cutting machine.
Guide Rod
3/4" thick solid Induction Hardened Rods of 50 to 60 HRC are secured with nylon bushings to allow free-foating movements of weight plates on guide rods.
Robotic Welding
Fully automatic robotic welding that improves weld accuracy for rugged fail-proof strength.
Powder-Coat Finish
Fully computer operated conveyorbased 14 tank process with zinc coating inside/outside and finished with an electro-statically applied textured powder coating, having an average thickness of 80 to 100 microns. The Antimicrobial Technology that is active in the coating destroys up to 99% of bacteria and mold on a protected surface.
Upholstery
Ergonomically designed superior grade upholstery with 2" thick high density molded PU foam designed independently as per the functionality of the machine and available in a large range of colours.
Seat Adjustment
Polypropylene Rack - In - Pinion mechanism for high strength to weight ratio and excellent abrasion resistant movement.
Warranty
All frames carry 10 years warranty from the date of installation.
Certification
X-Tend
Pec Fly / Rear Delt (JXC - 101)
Dimension
Length : 60 inches/152cms
Width : 68 inches/173cms
Height : 82 inches/208cms
Frame
50mm x 50mm & 50mm x 100mm
10 Gauge
Oval Tubes
All the loading joints connected parts have been given an extra 5mm plate for fail proof safety.
Weight Stack
220 Lbs. 1" thick Bright Mild Steel Plates with 2 free-floating Nylon Bushings
Shroud
High Grade 1.5mm CRC Sheets laser cut in half-length, covers rear side of the weight stack for safety.
Pulley
3", 4" & 5" Diameter, "V" grooved fiber glass reinforced nylon pulley wheels with sealed friction free precision ball bearings mounted in safety housings.
Cables
Industrial strength 3/16" to 1/4" nylon coated cables with 4200 lbs. load capacity.
Laser Cutting
Computer operated laser cutting, marking and drilling, Punching, degree cutting, notching with all in one 3D laser cutting machine.
Guide Rod
3/4" thick solid Induction Hardened Rods of 50 to 60 HRC are secured with nylon bushings to allow free-foating movements of weight plates on guide rods.
Robotic Welding
Fully automatic robotic welding that improves weld accuracy for rugged fail-proof strength.
Powder-Coat Finish
Fully computer operated conveyorbased 14 tank process with zinc coating inside/outside and finished with an electro-statically applied textured powder coating, having an average thickness of 80 to 100 microns. The Antimicrobial Technology that is active in the coating destroys up to 99% of bacteria and mold on a protected surface.
Upholstery
Ergonomically designed superior grade upholstery with 2" thick high density molded PU foam designed independently as per the functionality of the machine and available in a large range of colours.
Seat Adjustment
Polypropylene Rack - In - Pinion mechanism for high strength to weight ratio and excellent abrasion resistant movement.
Warranty
All frames carry 10 years warranty from the date of installation.
Certification
×